• Lineup

  • Overview

  • Document

  • The special site for LAPIS 13.56 MHz (NFC) wireless charging chip set, ML7630/ML7631.

Power receiver LSI

  Data sheets Function Overview Power Supply Operating Frequency Data Flash
(Byte)
Charging Control I/F ADC
(Method)
Operating Temperature
(°C)
PKG Sample and Buy
  • Halogen-free compatible mark : Halogen-free compatible products are available. Contact your sales representative for details.

Power transmitter LSI

  Data sheets Function Overview Power Supply Operating Frequency Data Flash
(Byte)
I/F ADC
(Method)
Operating Temperature
(°C)
PKG Sample and Buy
  • Halogen-free compatible mark : Halogen-free compatible products are available. Contact your sales representative for details.

Overview

13.56 MHz wireless charging chip set, "ML7630" and "ML7361"

LAPIS Technology's 13.56 MHz wireless charging chip set, "ML7630" and "ML7361", are designed for wireless charging system using the 13.56 MHz for power transfer. Small devices such as wearable and hearable devices with a limited space for antenna implementation can be "connectorless" because the antenna can be downsized by using this bandwidth.

Power receiver LSI "ML7630" can provide 200mW of a charging output. It also includes Tag function to allow Bluetooth® pairing, etc. by NFC touch. These functions are included in a WL-CSP package of 2.6 × 2.6mm.

Power transmitter LSI "ML7631", integrates functions necessary for power transmission such as detecting the dropout of the power receiver device, setting the power transmission output level, etc.into one chip, controlling the operating voltage to 5 V to ensure the operation from a USB power supply such as mobile battery. It can also mobilize the entire power charging system and is the optimum system for achieving a wireless power supply solution for small devices such as wearables.

Features

Features 1Super small chip with the power receiver function "ML7630", build-in software removes the need for software development

Power receiver LSI "ML7630" can incorporate the power receiver function in a 2.6mm WL-CSP package, with only external parts of a condenser in addition to a charger IC and four rectifier diodes.
Both "ML7630" and "ML7631" have a built-in software and no further development is necessary. Settings for each user can be configured separately from the PC tools provided by LAPIS Technology.

Feature 2Equipped with NFC Forum Type3 Tag function

Power receiver LSI "ML7630" has NFC Forum Type3 Tag function.
This is a ROM function that can read a fixed data written in advance in NDEF format* to a build-in 1 KB data flash. It can also communicate with an external NFC reader/writer via the tag data.

  • NDEF format: NFC Data Exchange Format
    A data format used for data exchange in NFC.

Feature 3Highly reliable Li-ion battery charging

ML7630 can control the LDO output within the proper temperature range by using an external thermistor for measuring a charging temperature.
Temperature can be measured in two ways: by the build-in 10 bit ADC with software and by the build-in hardware comparator.

Charging temperature can be controlled by both methods to ensure a highly reliable Li-ion battery charge, for which the charging temperature is important.

Feature 4Driven at 5V can mobilize the entire system

The power supply voltage of "ML7631" is 5V, which can be driven by a USB power supply such as mobile battery.

Since "ML7630" does not need power supply, mobile battery + "ML7631" + "ML7630" + target device to be charged, for example, can be configured and the entire system can be mobilized.

Feature 5Optimization of power transmitter

"ML7631" provides a function to adjust the power transmitter.
"ML7630", on the other hand, determines the voltage after rectification by the build-in ADC as well as any power shortage or surplus from unnecessary current passing through the build-in shunt regulator, and then notifies that information to "ML7631", allowing "ML7631" to eliminate unnecessary power transmission and to optimize the amount of power transmission.

Feature 6High-level safety by the detection function of foreign object and the dropout of the device

"ML7631" detects changes in power transmitter current/voltage by the build-in 10 bit ADC and stops the LDO output. It detects a metal piece or IC card to prevent heat or damage.
It also detects when "ML7630" goes out of the wireless charging range to prevent unnecessary power transmission.

Applications

LAPIS Technology's 13.56 MHz wireless charging chip set is useful for building a wireless charging system for compact devices with a limited space such as wearable devices with a rechargeable battery about 50 mAh, Bluetooth® headset, earphone, etc.

Application of LAPIS Technology's 13.56MHz wireless charging LSI

LSI Documents Download

 

Data sheets

rev.

Users Manual

rev.

White paper

rev.

Errata

rev.

Other

rev.

Package Code

Dimensions, Implementation specifications

Environmental data

MSL